Price list Electrical fixtures
How much to charge to replace a switch or outlet
Price it from your own shop rate, not a national average. The True Rate kit's Price Book puts this task at 0.25 to 0.5 hours each and starts you at 0.4 hours, plus $5 in supplies. At the worked example's $90 shop rate, that's $45 each flat. Across the typical range it runs $30 to $55, before the trip charge and the minimum.
- Typical time
- 0.25 to 0.5 hours each
- Starter hours
- 0.4 h each
- Supplies
- $5 each
- At $90/hr
- $45 each
This task, priced
This is an estimate from the numbers above, not a quote. Materials and fixtures the customer picks (the faucet, the fan, the door) bill separately at your materials markup.
What your rate does to this price
Same 0.4 starter hours and $5 in supplies, priced at three rates from the kit's worked example. Break-even covers the $2,870 a month overhead and the $60,000 pay goal and nothing more. The shop rate adds the 20% margin, rounded up to the next $5.
| Shop rate | Flat price |
|---|---|
| $65/hr, below break-even | $35 each |
| $70.52/hr, break-even (no profit) | $35 each |
| $90/hr, the worked example's shop rate | $45 each |
Charging $65 an hour instead of $90 takes $10 off this job, every time you do it. The price follows the rate because the hours don't change. That's why the kit starts with your rate, not someone else's price list.
Not sure your rate covers your costs? Run the free calculator. Why a 25% markup on supplies is only a 20% margin: markup vs margin, with a calculator.
What gets left off this estimate
These are the lines from the kit's "Did you forget?" list that apply to this job, and where the kit bills each one.
- Taking out and hauling the old fixture. Price Book: Haul-away line.
- Dump / disposal fees. Price Book: Haul-away + Dump fee lines.
- Customer-supplied parts (wrong part = another trip). Say it on the estimate: labor only, no warranty on their parts.
- Supply-house runs. Price Book: Materials pickup run. An hour a trip is normal.
- Permits, and your time to pull them. Custom line for your time, Materials line for the fee.
Before you send the number
- Ask how many switches or outlets they want changed. A whole trip for one device rarely pays.
- Write which switches and outlets are in the price, so the extras are a change order.
- If the wiring is brittle or scorched, stop and talk to the customer before you go on.
Starting points, not a price list to copy
These numbers are the True Rate kit's starter hours and supplies for a solo tradesperson with a few years in, on an ordinary house. They aren't industry data, a survey of what others charge, or a promise of how long the job takes you. Edit the hours for your market and your own speed. An old house, a seized nut or a fussy customer changes the job.
The $90 shop rate is only the kit's worked example ($2,870 a month overhead, $60,000 pay goal, 62% of hours billable, 20% margin). Your rate comes from your costs.
Some electrical and plumbing work needs a license, and many places cap what an unlicensed handyman can charge per job. Check your local rules before you offer or price this task.
How long does it take to replace a switch or outlet?
The True Rate kit's Price Book puts it at 0.25 to 0.5 hours each, and starts the price at 0.4 hours. That's a solo tradesperson with a few years in, on an ordinary house: tools out, the work and clean-up, with no drive time. If yours runs long, raise the hours, not your rate.
Does that include a trip charge or minimum?
No. The flat price is the task alone. In the kit's Price This Job sheet, a ticket with only this task adds a $35 trip charge, a 15% small-job buffer (because the whole job is under 4 hours) and a 5% contingency, then brings it up to the $195 minimum job charge. At $90 an hour, that's $195 for this task on its own. Those are the kit's starter settings. Set your own.
Where do these hours come from?
They're the True Rate kit's starter hours for a solo tradesperson with a few years in, working on an ordinary house. That's tools out, the work, and clean-up. Drive time isn't in them. They're not industry data or a survey of your market. Old houses and tight spaces take longer, so log your real times and edit them.
Price the whole ticket
The True Rate kit is a spreadsheet that prices all 80 jobs from your own rate. Its Price This Job sheet adds materials, the trip charge and the minimum, and shows your margin before you send the number. $39 once, for Google Sheets or Excel.